To enter this mode, first enter Programming Mode (page 9) then
press Mode, followed by 1, then 0 followed by Enter.
(MODE)
(ENTER)
(Mode Number 10)
+ 1 + 0 +
While the LED is flashing Red/Green, present a user card for each of
the facility codes(s) you want to add. After you are finished, allow the
reader to time out and return to normal mode before proceeding.
ADDING AND DELETING USERS
Add A Key Tag or Card To The System
Place the unit in the Program Mode (See Page 9). Press Add,
followed by the card or tag ID number. Then press Enter. For
example, to add card number 12 to the reader the following
sequence would be used:
(User ID Number 12)
(ADD)
(ENTER)
+ 1 + 2 +
Card number 12 is now valid.
Radio Key
®
RKDT-SA-M/SA-S Operating Guide
Secura Key
12
