X86
UDOO X86 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by M.B. Copyright © 2017 SECO S.r.l.
60
5.1
Accessories
5.1.1
M.2 Dual network modules
As a separated accessory, it is available an M.2 Dual Network Set, so composed:
An M.2 2260 module, which embeds a PCI-e packet switch. It virtually separates the PCI-e x2 Port, coming from the
UDOO x86 board (through M.2 Slot CN20), into two separated PCI-e ports, each one used specifically to manage a Gigabit
Ethernet controller. The Gigabit Ethernet interfaces, coming from the controllers, are then carried to a connector type HR
A1014WVA-S-2x15P or equivalent (2 x 15p, male, straight, P1, low profile, polarised).
A daughter-board, which mounts a connector identical to that available on the main M.2 module and two RJ-45 Gigabit
Ethernet connectors with integrated transformer.
Twisted pairs connecting cable, to connect the M.2 module with the daughter-board.
When this accessory is plugged into M.2 slot CN20, the UDOO x86 board will offer three different Gigabit Ethernet ports.
