Seco SECOCQ7-mITX2.0, Руководство пользователя

Страница: 25 / 39

SECOCQ7-mITX2.0
User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by G.M.
Copyright © 2013 SECO S.r.l.
SECOCQ7-mITX2.0
Page 25
27 CAM_D7 28 N.C.
29 CAM_I2C_SCL 30 V_CAM
31 CAM_I2C_SDA 32 V_CAM
33 CAM_RESETB 34 V_CAM
35 GND 36 GND
37 GND 38 GND
39 GND 40 GND
The carrier board offers also the possibility of the external connection of a CSI Camera through a
dedicated FFC/FPC connector, type HIROSE p/n FH12-16S-0.5SV(55).
CSI Camera Interface
– CN34
Pin Signal Pin Signal
1 CSI_DATA1- 9 CS
2 CS 10 GND
3 GND 11 CSI_PWWDN
4 GND 12 CSI_XCLK
5 CSI_CLK- 13 CSI_SCL
6 14 CSI_SDA
7 GND 15 CSI_RESET#
8 CSI_DATA0- 16 +3.3V_S
CSI signals can be derived from QSeven
®
Camera Interface Connector CN32, or from reserved
pins on Qseven
®
golden finger connector.
This is a factory option to be evaluated before ordering the module (it must be paired to the CPU
module you intend to use with the Carrier board).
In the following table, is shown the correspondence of the CSI signals in the two factory
alternatives:
FACTORY ALTERNATIVES
CSI Signal
CSI signals coming from
CN32
CSI signals coming from
golden finger connector
CSI_DATA1- CAM_EXP11 ---
CS CAM_EXP12 ----
CSI_CLK- CAM_EXP7 RSVD_132
CAM_EXP8 RSVD_134
CSI_DATA0- CAM_EXP9 RSVD_144
CS CAM_EXP10 RSVD_146
CSI_PWWDN CAM_EXP4 ----
CSI_XCLK CAM_External_Clock_A RSVD_154
CSI_SCL CAM_I2C_SCL GP0_I2C_CLK
CSI_SDA CAM_I2C_SDA GP0_I2C_DAT
CSI_RESET# CAM_RESETB LPC_RST#