SECOCQ7-mITX2.0
User Manual
- Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by G.M.
Copyright © 2013 SECO S.r.l.
SECOCQ7-mITX2.0
Page
11
2.3 Mechanical specifications
According to miniITX form factor, board dimensions are: 170 x 170 mm (6.693
” x 6.693”).
The printed circuit of the board is made of six layers; some of them are ground planes, for
disturbance rejection.
In order to fix the Qseven
®
module to the carrier board, on SECOCQ7-mITX2.0 have been
soldered four metallic spacers, height 4mm, 2.5mm diameter.
Two spacers (those closer to MXM connector) are always present, the other two spacers can be
factory configured for fixing of Qseven
®
or
μQseven
®
modules: this factory alternative has been
done since the spacers needed for fixing of
μQseven
®
modules would interfere with electronic
devices soldered on standard Qseven
®
modules.
Considering your possible scenarios, please take notice of what kind of modules you could use,
before purchasing one of the two possible configurations.
