SECOCQ7-mITX2.0
User Manual
- Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by G.M.
Copyright © 2013 SECO S.r.l.
SECOCQ7-mITX2.0
Page
15
3.1 Connectors placement - Overview
In the following picture, it is shown the connectors placement of SECOCQ7-mITX2.0 carrier board.
Standard connectors are placed on the same side of PCB, so that it is possible to place them on a
panel of an eventual enclosure.
PLEASE BE AWARE THAT, DEPENDING ON THE CONFIGURATION YOU PURCHASED, THE
APPAREANCE OF YOUR BOARD COULD BE SLIGHTLY DIFFERENT FROM THE FOLLOWING
ONE.
RTC Battery
holder
mSATA slot
USB2.0 ports
#6-7 Pin Header
Feature
connector
USB2.0 ports
#4-5 Pin Header
I2C EEPROM
Socket
I2C + I2S Pin
Header
FAN
connector
SATA
connector
USB3.0 or
USB2.0
connector
USB Client
connector
HDMI + optional
Display Port
Triple Audio Jack
CAN + RS-232
DB9 connectors
SD/MMC Slot
S/P-DIF
connector
2
nd
Audio
interface
External camera
interface
Backlight
connector
Manufacturer
connector
Qseven camera
interface
Gigabit Ethernet
+ Dual USB 2.0
CSI interface
PCI-e x4
interface
SPI Flash
socket
SPI
Pin Header
Front Header
interface
Power On
button
Display
EEPROM Socket
LCD (LVDS/eDP)
connector
Reset
button
LPC
Pin Header
ATX Power
Connector
