ADLER
ADLER User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: A.R./S.B. - Reviewed by M.B. Copyright © 2022 SECO S.p.A.
58
4.4.3.3
PCI Express Configuration submenu
4.4.3.3.1
PCIE Root Port #x submenus
4.4.3.4
SATA Drives Configuration submenu
ACPI Mode
Set LPSS I2C #4 Speed
Standard Mode
Fast Mode
Fast Plus Mode
Only available when LPSS I2C #4 is not disabled. Select LPSS I2C #4 Speed
Menu Item
Options
Description
Compliance Mode
Enabled / Disabled
Compliance Mode Enable/Disable
PCIE Root Port 3 - M.2 TYPE 2230 (CN15)
PCIE Root Port 4 Internal LAN 0 (CN20)
PCIE Root Port 5 Internal LAN 1 (CN21)
See submenus
Sets the parameters for each single PCI-e Root Port
Menu Item
Options
Description
PCIE Root Port 3 - M.2 TYPE 2230
PCIE Root Port 4 Internal LAN 0
PCIE Root Port 5 Internal LAN 1
Auto
Enabled
Disabled
Controls the PCI Express Root Port.
Auto: disable unused root port automatically for the most optimised power saving.
Enable: Always enable the PCIe root port.
Disable: Always disable the PCIe root port
(all the following items will disappear)
ASPM
Disable / L0s
PCI Express Active State Power Management Settings
PCIe Speed
Auto
Gen1
Gen2
Configure PCIe Speed
PCIe Selectable De-Emphasis
Enabled / Disabled
When the Link is operating at 5.0 GT/s speed, this bit selects the level of de-emphasis for an Upstream
component.
1b -3.5dB
0b -6dB
Menu Item
Options
Description
SATA Controller
Enabled / Disabled
Enable / Disable Chipset SATA controller, which supports the 2 black internal SATA ports (up to 3GB/s
supported per port).
