ADLER
ADLER User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: A.R./S.B. - Reviewed by M.B. Copyright © 2022 SECO S.p.A.
44
4.3.3
S5 RTC Wake Settings submenu
4.3.4
CPU Configuration submenu
Menu Item
Options
Description
Wake system from S5
Disabled
By Every Day
By Day of Month
Enables or disables System Wake on Alarm event.
The following menu items will appear only when this voice is not set to Disabled
Wake up hour
0..23
Sets the wake up hour in 0..23 format (i.e.,3 means 3am, 15 means 3pm)
Wake up minute
0..59
Sets the wake up minute
Wake up second
0..59
Sets the wake up second
Day of Month
1..31
This item is available only when
“
Wake system from S5
”
is set to
“
By Day of Month
”
. Sets the day of month for
Wake on Alarm event. Valid range s from 1 to 31, error checking will be done against month/day/year
combinations that are not valid.
Menu Item
Options
Description
Detailed CPU Information
Shows board
’
s specific SoC information
CPU Power Management
See Submenu
CPU Power Management options
Active Processor Cores
Disabled / Enabled
Number of Cores to enable in each processor package
Core 0
Core 1
Core 2
Core 3
Disabled / Enabled
Core #x Enable / Disable. Only available when
“
Active Processor Cores
”
is enabled
Intel Virtualization Technology
Disabled / Enabled
When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology
VT-d
Disabled / Enabled
Enables or disables CPU VT-d
Bi-directional PROCHOT
Disabled / Enabled
When a processor thermal sensor trips (either core), the PROCHOT# will be driven. If bi-direction is enabled,
external agents can drive PROCHOT# to throttle the processor
Thermal Monitor
Disabled / Enabled
Enables or disables the Thermal Monitor
Monitor Mwait
Disabled / Enabled / Auto
Enables or disables Monitor Mwait
P-STATE Coordination
HW_ALL / SW_ALL / SW_ANY
Change P-STATE Coordination type
DTS
Disabled / Enabled
Enables or disables the Digital Thermal Sensor
