Seco COM-Express CCOMe-C79, Руководство пользователя

Страница: 30 / 70

CCOMe-C79
CCOMe-C79 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: A.R. - Reviewed by E.S. Copyright © 2021 SECO S.p.A.
30
PCI-E lane 9 transmit - PCIE_TX9- A75 B75 PCIE_RX9- PCI-E lane 9 receive -
Power Ground GND A76 B76 GND Power Ground
PCI-E lane 10 tr PC A77 B77 PC PCI-E lane 10 r
PCI-E lane 10 transmit - PCIE_TX10- A78 B78 PCIE_RX10- PCI-E lane 10 receive -
Power Ground GND A79 B79 GND Power Ground
Power Ground GND A80 B80 GND Power Ground
PCI-E lane 11 tr PC A81 B81 PC PCI-E lane 11 r
PCI-E lane 11 transmit - PCIE_TX11- A82 B82 PCIE_RX11- PCI-E lane 11 receive -
Power Ground GND A83 B83 GND Power Ground
NC-SI Transmit enable NCSI_TX_EN A84 B84 +5V_ALW +5V Standby power line
GP Input 3 / SDIO data signal 3 GPI3/SD_DATA3 A85 B85 +5V_ALW +5V Standby power line
Reserved Purpose Signal RSVD#A86 A86 B86 +5V_ALW +5V Standby power line
Reserved Purpose Signal RSVD#A87 A87 B87 +5V_ALW +5V Standby power line
PCI-E Clock ref PCIE A88 B88 BIOS_DIS1# BIOS boot device select 1 signal
PCI-E Clock reference - PCIE_CK_REF- A89 B89 NCSI_RX_ER NC-SI Receive error
Power Ground GND A90 B90 GND Power Ground
Power supply for Carrier Board SPI Device SPI_POWER A91 B91 NCSI_CLK_IN NC-SI Clock reference
Data in to Module from Carrier SPI Device SPI_MISO A92 B92 NCSI_RXD1 NC-SI Receive Data
GP Output 0 / SDIO Clock GPO0 / SD_CLK A93 B93 NCSI_RXD0 NC-SI Receive Data
Clock from Module to Carrier SPI Device SPI_CLK A94 B94 NCSI_CRS_DV NC-SI Carrier Sense/Receive Data Valid
Data out from Module to carrier SPI device SPI_MOSI A95 B95 NCSI_TXD1 NC-SI Transmit Data
TPM Physical Presence pin, Active High
Input for optional on-board TPM device
TPM_PP A96 B96 NCSI_TXD0 NC-SI Transmit Data
Type10 signal: Not connected Type10# A97 B97 SPI_CS# SPI Chip Select signal
Module
’
s serial port 0 TX SER0_TX A98 B98 NCSI_ARB_IN NC-SI hardware arbitration input
Module
’
s serial port 0 RX SER0_RX A99 B99 NCSI_ARB_OUT NC-SI hardware arbitration output
Power Ground GND A100 B100 GND Power Ground
Module
’
s serial port 1 TX SER1_TX A101 B101 FAN_PWMOUT FAN Speed control
Module
’
s serial port 1 RX
SER1_RX A102 B102 FAN_TACHIN FAN tachometer input
LID button input LID# A103 B103 SLEEP# Sleep Button Input
+12V switched power supply +12V_RUN A104 B104 +12V_RUN +12V switched power supply