SECO-LARM DR-108Q, Руководство пользователя

Страница: 22 / 70

DVR User
’s Manual
21
3.4.3 Network Time Protocol Setup
Time Zone
Select < Time Zone > to enter the time zone. To find out the correct local time
zone, please visit www.greenwichmeantime.com or refer to the following
figure.
NOTE: The < Time Zone > must be set to the correct local time zone or
the < Network Time Protocol Setup > will not be accessible.
Network Time Protocol Setup
After entering the time zone, the < Network Time Protocol Setup > option will
appear. Select the < Network Time Protocol Setup > to set the time server.
The default time server is time.nist.gov, but the user can change it to other
time servers when desired. A list of IP addresses of the time servers is listed
below.
129.6.15.28 129.6.15.29 132.163.4.101
132.163.4.102 132.163.4.103 128.138.140.44
192.43.244.18 131.107.1.10 69.25.96.13
206.246.118.250 208.184.49.9 64.125.78.85
207.200.81.113 64.236.96.53 68.216.79.113
After the time server is set, set < Manually Time Sync > to <Yes> to sync the
time. The time sync can also be updated periodically. Set < Automatically
Time Sync > to <ON>, and the time will be automatically synced once an
hour.