Adjust speed and contact pressure
You can make the following changes by pressing the corresponding buttons: The "+" function is
located at the upper end of the button, while the "-" function is at the lower end.
Increase and reduce speed
Increase and reduce contact pressure
The cutting speed and contact pressure cannot be changed while a plotting job is in progress.
Other settings
The configuration menu is opened by pressing and holding the "Set" button for 5 seconds.
Use the up and down arrow keys to cycle through the menu options.
Left and right arrow keys allow you to adjust the relevant values.
Press the "OK" button to leave the configuration menu at any time.
Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany [email protected]
13
