● Click on the button labeled "Search device" and follow the instructions in the installation
wizard. Confirm the message regarding successful installation by simply clicking on the
button labeled "Done". Now you can control your Secabo vinyl cutter using DrawCut.
Initial operation of the device
Make sure that there is sufficient space for the film transport in front of and behind the device. The
cutter may only be operated in a clean and dry environment.
● Connect the vinyl cutter to a 230 V socket using the supplied power cable.
● Now switch on the cutter.
Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany [email protected]
9
