Sebury sKey2, Инструкция по эксплуатации

Страница: 5 / 10

7. Reset to Factory Default
8
.
Voice and Light Indication
9. Administrator Keypad Operation:
In the state of power off, press “*” and hold, the indicator light turn on orange when power on
for 1 second, press “*” within 1 second, release it until hearing two shot beep voice, then hear a
long beep voice, enter the normal operation state. Reset to factory default setting is
successfully, but don’t delete user information.
Operation Status
Standby
Keypad
Read Card
Unlock
Operation Successful
Operation Failed
Password Inputting
Read card and password
Read Multi-card to open door
1st menu
2nd menu
During Setting
Manage card Enter
Manage Card Exit
Alarm
Indicator Light Color
Red
Green
Green
Green
Slow Red Flash
Slow Red Flash
Slow Red Flash
Slow Red Flash
Slow Orange Flash
Orange
Orange
Red
Fast Red Flash
Buzzer
Short Beep
Long Beep
Long Beep
Long Beep
3 short beep
Two short beep
Long beep
Alarm Voice
Red Flash
6-8 digits administrator
password
，
#
Remark
Default: 888888
Function
Enter administrator Operation Status
Enter Administrator Operation
When administrator password is not entered correctly, the effective operation interval will be
more than 5 seconds, and the current operation will exit to the normal standby state; when
administrator enter correct password, the effective operation interval more than30 seconds,
and the current operation will exit to the normal standby state. During operation programme,
press “#” means confirm input number, in adding or delete cards operation, it means end the
loop of operation and return to the previous operation; Press “*” key every time to exit the
first-level operation state, and observe the indicator color to know which state exit at present.
The following operations are valid only after entering the administrator operation status.
4/8