Sebury sKey2, Инструкция по эксплуатации, Страница: 9 / 10

10.2 Standalone Access Control Mode
10.3 Anti-passback Mode
11 Simple Troubleshooting
Under this mode:
The electric lock can be opened by reading user card or inputting user password on the
device or external card reader.
Read anti-stress card or input anti-stress password on the device or external card reader to
open the electric lock, the external alarm will sound at the same time.
The anti-passback means that it need read card not only enter room but also exit room to the
same door, it cannot read card twice continuously to enter room or exit, prevent two people from
entering and exiting with one card at the same time, under this mode:
Read anti-stress card or input anti-stress password on the device or external card reader to
open the electric lock, the anti-passback mode will not affect the device, the external alarm will
sound at the same time.
Read user card on the device or external card reader, user must read card on the device at
the first time if want to enter room, user must read card on the card reader at the second time if
want to exit room, the user must read card repeatly between the device and external card
reader, then can enter room or exit room.
In anti-passback mode, user password is invalid.
Trouble Phenomenon
Reading distance too close
User password setting error
Cannot open door after
inputting user password
Alarm under normal situation
No reaction after reading card
The Keypad light doesn’t work.
Can not enter administrator
setting
Other Phenomenon
Fault Reason
1.Card quality issue
2.Switch power supply interferences
card reading
1.The password setting does not
comply with the specification
2.Setting user password under card
reader mode
Use password 1234 to open door
When the product is installed, there is
light leakage at the bottom
The product is not at the standby
state
Keypad light mode setting incorrect
Forgetting administrator password
Not above reasons
Fault Reason&Solution
1.Please use original card
2.Power supply and standalone
access control need connect to
ground wire
1. User password can not set to
1234
2. User password only can be 4-6
digits
1234 is user password initial
data, and can not use to open
door, it must modify to other
password number
When the device is installed, the
bottom should be close to the
wall without light leakage.
Press “*” to exit, the indicator
become red, let the device
standby state
1.Please set the key light mode
to normal ON or automatic
2.In automatic mode, the
indicator light will turn off
automatically without operation
after 30S
Reset to factory default, default
administrator password
is 888888.
Use conditions and parameters
need to be reset without losing
user data
Users can’t solve the problem by
themselves, please consult our
professional after-sales service
staff
8/8