2.3 Debug
Turn on the power supply and test according to the instructions. The debugging will be completed
until the lock can be opened correctly by reading card, password and exit button.
3 Basic functions
Operating conventions：
> A long sound＂Di-＂indicates correct operation. Three short sounds＂Di Di Di＂indicate wrong
operation . The indicator light flash in green means operate correctly.
> ＂#＂indicate confirm completed, normally used behind pass word, ID number, or parameter.
> ＂*＂indicate cancel the current operation or return to the previous menu.
> The management menu is fixed to 1 digit from 0-6, cannot press key＂#＂after it. After entering
setting menu, the indicator light turns to orange.
> Under administrator mode, it will automatically exit to standby state if there is no operation
within 30 seconds.
> Under non- administrator mode, it will automatically exit to standby state if there is no operation
within 5 seconds.
Light and buzzer indication:
3.1 Enter into administrator mode
* 6 digits administrator password #
888888 is the default factory administrator code. It fixed to 6 digits.
For example, press *888888* to enter into administrator mode.
Enter into the administrator mode first before start the below operations.
operation status
Light color
Buzzer
Standby
Red
PIN inputting
Red flash
Read the card in Card & PIN mode
Red flash
Enter into a
dministrator
mode
Red flash
Enter menu setting status
Orange
Successful operation
Green
A long sound
Unlock the lock
Green
Press numeric key
A short sound
Press *
A long sound
Failed operation
Three short sound
