1.3 Functional component
1.4 Technical parameters
> Working voltage: DC12±2V
> Static current: ≤20mA
> Operating current: ≤100mA
> Drive electric lock current: ≤3A
> Working environment temperature: -20~50°C
> Working environment humidity: 0~95% (no condensation)
> Maximum card reading distance：5cm
2 Installation, wiring and Debugging
2.1 Installation
Unscrew the anti-tamper screw on the bottom of the product with the special anti-tamper
screwdriver, remove the back case of the product, then according to the opening position of the
back case, use the impact drill to open the corresponding holes on the wall, make a hole with
diameter larger than 8mm, and four holes with diameter of 6mm, then insert four matching plastic
expansion screws, and fix the back case to the wall with four matching self-tapping screws.
As shown below:
Button
frame
indicator
LOGO
Indicator light
Metal Key
Card reader antenna
Metal body
