Sebo 90406AM, Руководство пользователя

Страница: 11 / 16

11
CLOG REMOVAL
Clogs in the Airflow Pathway -
Figure 13
Most clogs can be removed by accessing the airflow pathway via the orange colored
access door (39) located on the underside of the power head. However, other clogs
may only be removed by accessing the airflow pathway by disassembling the
machine in the opposite sequence of the machine’s original assembly (see assem-
bly, page 6).
Clogs in the Attachment Hose -
Figure 14
Blockages in the hose can be cleared by removing the attachment hose (12) from the
machine by squeezing the retaining ring (4) and inserting the opposite end of the
hose in the connecting tube (24). Hold the hose upright with one hand blocking the
top end and switch on the machine. If necessary, quickly lift your hand on and off the
end of the hose. If this procedure does not clear the clog, a straight wire can be
inserted into the hose to push out the clog. Take care not to puncture the hose with
the wire.
Clogs in the Cleaning Wand (Active Wand) -
Figure 15
Remove attachment hose (12) from the cleaning wand (15) by pressing the hose
release button (27). Then, grip cleaning wand handle (11) and remove tube from the
machine. A straight wire can be inserted into the tube to push out the clog.
Clogs in Entrance to Filter Bag -
Figure 16
Remove attachment hose (12) from vacuum cleaner (see figure 14) and remove front
cover (7). Clean out connecting tube (24) and/or entrance to bag (40).
Clogs in the Swivel Neck -
Figure 17
Clogs in the swivel neck (20) can be removed by first pressing the housing release
button (8) and lifting off the bag housing (6). Lift upward firmly and evenly to prop-
erly remove the bag housing. Then, release the foot pedal (19), lower the swivel
neck, check inside the swivel neck channel closest to the foot pedal (see arrow), and
clean out pathway.
Figure 17
Figure 14
Figure 13
Always unplug vacuum from outlet before removing
any clogs!
!
Figure 16
Figure 15
12
15
11
27