Sebo 90406AM, Руководство пользователя

Страница: 8 / 16

8
OPERATING INSTRUCTIONS
Starting The Machine -
Figures 1 & 2
Before turning on your vacuum cleaner, make sure that the vacuum
handle is in its upright locked position and that you have a firm hold on the
handle grip to keep the machine from moving forward.
1. Turn the quick release cable hook (14) to the up position
by moving it to the left or right (figure 1).
2. Release the power cord plug from the power cord
and lift the cord off of the upper cord hook (27 - figure 2).
3. With the switch (2) in the “O” (OFF) position (figure 2), plug the
polarized power cord into a 120 volt outlet located near the floor.
Switch Position
O = OFF
I = ON
Operating Positions -
Figure 3
To release the machine from the upright locked position, press down on the
foot pedal (19) and lower the handle into the normal operating position.
The handle can be lowered to an intermediate stop position in order to lift up
the brush head for maneuvering over rugs, etc. To lower the handle to a hor-
izontal position useful for vacuuming under beds, the foot pedal must be
pressed a second time. The intermediate stop position can be closed off by
the orange-colored slider (28) on the back of the swivel neck (20), so that the
handle will go from vertical to horizontal in one movement.
WARNING!
The quality, condition, coating, texture, age and manufacturing technique of all floor surfaces vary. There-
fore, upright vacuums with rotating brushes, including your SEBO, may damage some floor coverings or surfaces. Some
types of high-gloss hardwood floors, cushion vinyl, berber carpets, long shag, and delicate or hand-woven carpets are partic-
ularly vulnerable to damage by rotating brushes. When possible, consult the materials supplied by your floor’s manufacturer
for information on proper upkeep and cleaning. To ensure that your new SEBO vacuum cleaner is compatible with your
floor, please test the vacuum cleaner on each type of flooring surface in a small inconspicuous area to determine if any
damage occurs. If damage occurs, stop using the vacuum cleaner immediately!
Care must be taken to ensure that the bottom of the machine does not contact the floor.
If this happens, damage to the floor
could occur.
If damage occurs, stop using the vacuum cleaner immediately!
2
27
!
Figure 1
Figure 2
Figure 3