PURPOSE OF THE DOCUMENT
This document describes how to use and set up the device RGDAT-A70 (directional fault and voltage
absence detector) compliant with technical specification GSTP001 by ENEL.
This document is referred to the model installed on pole where are installed driven switch or recloser
(RGDAT-A70 /O, ENEL serial number 160004).
REFERENCE DOCUMENTS
•
ENEL - GSTP001 - rev. 03 - December 11
th
2017
•
Col - Div. Seb - P515D404 Communication protocol - Rev. A - September 2016
•
Col - 188 MN 0001_EN - Combi-Col-24-O Installation and instruction manual - Rev. 0 - December
2018
•
Altea - CVS-P-24-O Technical specifications - Rev. 0 - October 23
rd
2015
•
Altea - CVS-P-24-O Installation Manual - Rev. 1 - October 23
rd
2015
INFORMATION AND PRECAUTIONS
Before using the device RGDAT-A70, please read carefully the following instructions.
Avoid starting the installation, maintenance or setup of the equipment without consulting this manual.
The device RGDAT-A70 has to be used by staff specially trained for the purpose.
For proper operation of the device, you must follow these guidelines:
•
The RGDAT-A70 device is intended for use by qualified personnel with knowledge of the physical
phenomena and the risks related to electricity. Training and education of the personnel expert in
the use of the device is competence of the buying company of the product itself.
•
The device should be used only when it appears in good condition, ie there are no signs of
damage. Its use must be made in accordance with the security rules of the specific workplace and
application.
•
The security conditions and criteria are guaranteed under the conditions of use described in this
manual. Improper use of the device or the included accessories may cause damage to people, to
the device or to the equipment connected to it. The manufacturer and distributors are not liable for
any damage caused by improper use of the device. The user assumes all responsibility and risk.
•
This user manual must always be available at the place where the device RGDAT-A70 is installed.
•
Before using the device RGDAT-A70, the staff assigned to RGDAT-A70 must read this user
manual. This also applies to all persons who also occasionally works with the device RGDAT-A70.
•
Any breaking or modification to the case, or any part of the equipment, could impair the proper
functioning of the device.
•
Do not use the device RGDAT-A70 in extremely humid environments and/or if there is risk of
condensation inside the device. To avoid the risk of electric shock, do not plunge the equipment or
the supplied accessories in the water or other liquids.
•
Do not use the device RGDAT-A70 in the presence of open flames.
•
Do not use the device RGDAT-A70 in environments where there are flammable gases or vapors.
•
Avoid moving the equipment when it is in use, in order to avoid accidental detach of the cables that
may create a dangerous situation for the user.
•
For your safety, avoid using non-compliant cables, damaged or worn.
P515D851 Rev. E
November 2019
Pag. 4 of 45