Events are stored by RGDAT-A70 in a non-volatile memory, so they are retained even if you turn off
the equipment.
The last item on this submenu, "
Diagnostics
", allows you to get the information processed by internal
self-diagnostic module of RGDAT-A70. It displays two items: the current diagnostics, instantaneous,
and the historical one, showing the conditions recorded since the last power-on (or restart).
“Send data” Submenu
This submenu has a series of items which allow you to send data to the RGDAT-A70 (configuration,
date & time, etc.).
It is necessary that the computer is physically connected to RGDAT-A70 by means of a RS232 port
(or USB-RS232 converter) in order to send data. If not so, you'll see an error dialog box when you try
to access the features of the various items of this submenu.
With the first entry, "
Setup data
", you can send the configuration data to RGDAT-A70; that data can
be set with the entries of menu "Setup data", which is explained later.
The sending of configuration data is also possible using the icon
in the toolbar.
Successfully sending of configuration data is highlighted by a specific dialog box.
P515D851 Rev. E
November 2019
Pag. 24 of 45
