background image

Owners Handbook                                                                                        59 
 
 

S e a w i n d   C a t a m a r a n s    

MANUFACTURER’S WARRANTY PROVIDED BY SEAWIND 

GROUP HOLDINGS PTY LTD

 

1.

 

LIMITED ONE YEAR WARRANTY 

THE BUILDERS warrants to the first-use Purchaser and any subsequent owner during 
the warranty period, that any part manufactured by THE BUILDERS will be free of 
defects in material and workmanship for a period of twelve (12) months from the date 
of delivery to the first use Purchaser under normal use and service.  THE 
BUILDERS’s sole obligation under this warranty shall be limited to replacing, 
correcting or repairing any part manufactured by THE BUILDERS which is 
determined by THE BUILDERS to be defective by reason of faulty workmanship or 
material.   

 

2.

 

LIMITED FIVE YEAR HULLS STRUCTURAL WARRANTY 

THE BUILDER further warrants to the first-use Purchaser only during the warranty 
period that the hulls, beams, deck and furniture of the PRODUCT shall be free of any 
structural failure during normal operation for a period of five (5) years from the date of 
delivery to the first-use Purchaser.  THE BUILDER’s obligation under this warranty 
shall be limited to replacing, correcting, or repairing any part which, in the judgment 
of THE BUILDER, by its failure, has impaired the structural integrity.  This is the 
Purchaser’s sole and exclusive remedy. 
This structural failure warranty shall be voided if THE BUILDER should determine 
that said components have been subjected to any abuse, including but not limited to 
collision with other PRODUCTs, structures or objects.  The warranties are expressly 
conditioned upon the Purchaser’s Proper Use of the PRODUCT, meaning the 
Purchaser must use the PRODUCT and operate it as directed in and after reviewing the 
Manuals, and perform maintenance to the PRODUCT and accessories as 
recommended in the Manuals. This additional warranty is only transferrable to second 
time purchaser, if purchased within three years from date of initial delivery and is 
limited to 3 years from date of initial delivery. 

 

3.

 

LIMITED THREE YEAR BLISTER WARRANTY 

THE BUILDER further warrants to the first-use Purchaser only during the warranty 
period that the hull manufactured by the Builder will be free of gelcoat voids and 
blisters for a period of three (3) years from the date of delivery to the first-use 
purchaser.  
THE BUILDER’s obligation under this warranty shall be limited to repairing the void 
or blister.  
This additional warranty is not transferable by the first-use purchaser to subsequent 
purchasers  
 

 

4.

 

RESTRICTIONS APPLICABLE TO WARRANTIES  1, 2 & 3 
above. 

The following are not covered under the limited warranties: 

1)

 

Problems caused by accident, misuse, neglect, improper maintenance, storage, cradling 

or blocking, negligent or improper operation, normal wear and tear, improper repair, 

Содержание 1160 Deluxe


































































Отзывы: