Battery
green
State of the transmitters battery voltage
The state of the battery is shown by this LED.
- permanent light
=> battery is full
- flashing light
=> battery reduced
full
OK
change
critical
empty
3.6
2.7
3.1
[V]
3.2
3.0
t
0%
50%
100%
10%
The important characteristic of the Lithium battery is, that the voltage is kept practically
constant up to the end of life.
Data
gelb
received measuring data from the transmitter or no data
flash
reception of valid sensor data: wind direction and -speed
note: the transmitter will send data in uneven interval.
This means that not regular blinking of LED is normal.
permanent ON
no communication for more than 10 seconds.
The wind direction hand 'waves' between -30° and +30°
ERR
red
disturbance/defect of the transmitter or receiver
STATUS
red
display of the system status. see button SW1
4.2 LED's after PowerON
After Power ON you will see:
1. LED-Test
all LED's ON
2. Configuration
Position of the configurations switches
1
2
3
4
OFF ON
ST60- Wireless
Owner's Handbook
Doc:
ST60_Wireless_Manual_E_V10
LastEdit:
03.02.2005
Printed:
03.02.2005
page 8
- 20
