1
Introduction
Thank you for your order of this ST60-Wireless set.
We are convinced, that with the use of this device the installation will be much easier.
The units are ruggediest and will serve you well for many years.
The ST60-Wireless replaces in a ST60 System the long cable from the windsensor to the
ST60 Display through a radio transmission.
With this solution you don't need complicated wiring through the mast and the body of the
boat. In addition you will have a reduction of weight up to 1 KG.
ST60-Wireless device and its function
Transmitter
The original Wind Vane for measuring the direction and speed will be
screwed directly on the transmitter. After mounting of the battery, the
transmitter starts periodically measuring the sensor signals and sends
this data by radio transmission to the receiver.
Receiver
The receiver converts this data to the original signals. The ST60 display
'sees' the same signals, as if they where transmitted by cable.
Battery, power managment
For a simple handling and use in an extreme range of temperatur from
-30°C to +70°C we use a high density energy Lithiumbattery.
(-40°C...+85°C are possible without damaging the battery). Through a
very efficent energy managment, a battery can be used for many years.
This type of battery can be stored for up to ten years, with a powerloss of
only 1% per year.
!! this battery ist NOT reloadable and may NEVER be connected to a
battery charger.
ST60- Wireless
Owner's Handbook
Doc:
ST60_Wireless_Manual_E_V10
LastEdit:
03.02.2005
Printed:
03.02.2005
page 3
- 20
