Seav 96340000, Руководство пользователя

Страница: 14 / 36

14
for manual control must be completed
positioning the push button panel in
such a way that the user is not placed
in a dangerous position.
14) The safety function ensured by the con-
trol unit is active only during closing,
therefore, protection on opening must
be ensured in the installation phase with
measures (guards or safety distances)
independent of the control circuit.
15) For proper functioning of the radio receiver,
if using one or more control units, the instal-
lation at a minimum distance of at least 3
metres one from the other is recommended.
TECHNICAL DATA:
- Power supply : 230 Vac 50-60Hz 900W (4A) max.
- Flashing light output : 230 Vac 50-60 Hz
100W Resistive Load max.
50W Inductive Load max.
- Motor output : 230 Vac 50-60Hz 750 W max.
- Services power supply output : 24 Vac 3 W max.
- Safety devices and controls in BT : 24 Vcc
- Operating temperature : -10 ÷ 55 °C
- Radio receiver : see model
- Op. transmitters : 12-18 Bit or Rolling Code
- No. of devices that can be stored : 120 max.
- Board dimensions : 100x105 mm.
- Dimensions of container : 110x121x47 mm.
- Container : ABS V-0 (IP54).
TERMINAL BOARD CONNECTIONS:
CN1:
1 : 230 Vac line input (Phase).
2 : 230 Vac line input (Neutral)
3 : 230 Vac Flashing light Output (Neutral).
4 : 230 Vac Flashing light Output (Phase).
5 : Opening 230V Motor Output.
6 : Common 230V Motor Output.
7 : Closing 230V Motor Output.
CN2:
1 : Power supply to photocells (24Vac 3W).
2 : Power supply to photocells (GND).
3 : Control button input (NA).
4 : Common GND input
5 : Safety device input (NC).
6 : Aerial earth input.
7 : Aerial hot pole input.
CN3:
1 : Power supply output 12 VDC Device.
2 : Communication port RS 485 signal A.
3 : Communication port RS 485 signal B.
4 : Power supply output 0 VDC Device.
The electronic control unit:
LG 2035 New Reader - LRS 2035 New Reader
LRS 2035 SET New Reader - LRH 2035 New Reader
they comply with the specifications of the Directives
RED 2014/53/EU, EMC 2014/30/EU, LVD 2014/35/EU.