Seav 96010000, Руководство пользователя

Страница: 10 / 56

10
The power supply leads and connection
cables must be secured using the cable
clamp included in the container.
- Connect the earth wire of the motor to
the earth wire of the electrical system
using the special terminal, as illustrat-
ed in the connection diagram.
- The control unit is not equipped with a
230 V a/c electric line sectioning device.
The installer is responsible for installing
a sectioning device in the system. The
sectioning device must be positioned
so that it is protected against acciden-
tal closure, in compliance with section
5.2.9 of EN 12453.
- The motor reducer used to move the
shutter must comply with section 5.2.7.
of EN 12453.
- For the radio receiver to operate correct-
ly when two or more control units are
used, we recommend that you install
the devices at least 3 metres away from
each other.
TECHNICAL DATA:
- Power supply : 230V~ 50/60Hz 2,5 W
- Motor output : 230V~ 500W Max.
- Working temperature : -10 ÷ 60 °C
- Radio receiver : see model
- Compatible radio controls : 12-18 Bit or Rolling Code
- Anemometer sensitivity : 5 ÷ 40 Km/h
- Sun sensor sensitivity : 5 ÷ 40 Klux
- Number of codes that may be stored : 4 Max
- Packaging dimensions : 240x185x110 mm.
- Container : PC UL94V-0 (IP54)
CONNECTION OF CN 1 TERMINAL BOARD :
1: Earth
2 : 230V line input (Phase).
3 : 230V line input (Neutral).
4 : Upward movement motor output.
5 : Shared motor output.
6 : Downward movement motor output.
INITIAL OPERATING CONDITION:
The device can only operate in conjunction with one or more radio controls. There is no
radio control code stored in the default factory setting.
BeSUN
are in compliance with the specifics of
RED 2014/53/EU, EMC 2014/30/EU, LVD 2014/35/EU
Directives.