Seat Arona 2018, Руководство пользователя

Страница: 142 / 372

Operation
Daytime running lights
The daytime running lights consist of individu-
al lights, integrated in the front headlights. By
connecting the daytime running lights, these
lights are switched on
1)
›››
.
The daytime running lights switch on every
time the ignition is switched on, if the switch is
in positions

or

, according to the level of
exterior lighting.
When the light switch is in position

, a light
sensor automatically switches dipped beam
on and off (including the control and instru-
ment lighting) or the daytime running lights
depending on the level of exterior lighting.
WARNING
●
Never drive with daytime lights if the road
is not well lit due to weather or lighting
conditions. Daytime lights do not provide
enough light to illuminate the road properly
or be seen by other road users.
● On vehicles with rear lights with bulbs,
when activating the daytime running light
the rear lights are not switched on. A vehi-
cle which does not have the rear lights on
may not be visible to other drivers in the
darkness, in the case of heavy rain or in
conditions of poor visibility.
Fog lights
Fig. 142
Instrument console: light panel.
Switching on the front fog lights*
●
Pull the light switch to the first point
›››
Fig. 142
1
, from positions

,

or

.
The symbol

in the light switch lights up.
Switching on the rear fog light (vehicles
with front fog lights)
●
Completely pull the light switch
2
from
position

,

or

. The

lamp on the in-
strument panel lights up.
Switching on the rear fog light (vehicles
with no front fog lights)
●
Completely pull the light switch
2
from
position

,

or

. This type of switch on-
ly has one position. The

lamp on the instru-
ment panel lights up.
Turn signal and main beam lever
Read the additional information carefully
›››

page 32
Parking lights
●
Switch the ignition off and remove the key
from the lock.
●
Move the turn signal lever up or down to
turn the right or left-hand parking lights on,
respectively.
Convenience turn signals
For the one-touch signalling, when the igni-
tion is switched on, move the lever as far as
possible upwards or downwards and release
the lever. The turn signal will flash three times.
One-touch signalling is activated and deacti-
vated in the Easy Connect system via the

/

button and the function button
SET-
TINGS > Lights > One-touch signal-
ling
›››
 page 34 .
1) On vehicles equipped with rear LED lights, the
rear side light is switched on as well.
140