Seastar Solutions OPTIMUS EPS, Инструкция по эксплуатации и руководство пользователя

Страница: 20 / 56

© 2012 SeaStar Solutions Optimus Operations Manual, Rev. D
3-6
1. Check steering fluid level in all steering pumps.
Each Optimus hydraulic pump has a steering fluid reservoir.
Ensure the fluid level is between the MIN and MAX marks on the
reservoir as shown in the figure below. Use only SeaStar EPS
steering fluid (HA5482) in the Optimus EPS System.
FAILURE TO ADHERE TO THESE WARNINGS MAY RESULT IN LOSS OF
BOAT CONTROL, LEADING TO POSSIBLE EJECTION FROM VESSEL,
CAUSING PROPERTY DAMAGE, PERSONAL INJURY AND/OR DEATH.
3.3 System Inspection
2. Verify immediate steering response when turning steering wheel(s).
Turn the steering wheel slowly to port and to starboard and make
sure the engines follow the commands. Watch that the hoses and
cables move freely without any snags or hang-ups.
3. Inspect all steering hoses, fittings and mechanical and
electrical cables for wear, kinks, or leaks.
Check all steering hoses and fittings between the pump, service
valves and cylinders for any signs of leakage, kinking, wear or
chafing. Check all electrical and mechanical cabling for abrasion,
wear, rubbing or chafing. Check that all connections are tight and
free of corrosion.
WARNING
Figure 3-10. Location of fluid level marks.