Seastar Solutions OPTIMUS EPS, Инструкция по эксплуатации и руководство пользователя

Страница: 21 / 56

© 2012 SeaStar Solutions Optimus Operations Manual, Rev. D
3-7
4. Check for binding, loose, worn or leaking steering or shift/
throttle control components.
Check all shift and throttle cables for signs of wear, damage or
chafing. Check that all linkages and cables move freely and are
not binding or corroded.
5. Verify proper shift and throttle response for all control levers.
Check that all shift and throttle levers operate freely and cause the
engines to shift accordingly. Put the engines in neutral idle mode
and confirm that the throttle responds correctly and returns to idle.
6. Verify that no alarms or warnings are shown on the CANtrak display.
If any warnings are found, follow the instructions on the CANtrak
screen or refer to Section 6 before proceeding.
Read the System Inspection steps on the CANtrak display and
acknowledge them by pressing the button labeled OK.
It is recommended the full system inspection be reviewed on a
regular basis to retain familiarity.
After becoming familiar with the system inspection process, the
operator can use the OK button to acknowledge that the system
inspection process was understood and completed and can then
go directly to the steering mode screen.
DO NOT OPERATE BOAT IF ANY COMPONENT IS NOT IN PROPER
WORKING CONDITION.
WARNING
CAUTION