13
Attaching camera/housing to two flashes
. You can easily add up to
two flashes to your underwater camera. Using dual flashes helps
avoid shadows and will further intensify brightness and color.
Remove the smaller mounting screw (0.625” / 15.9mm, item
#SL96025) from each flash unit. Attach the larger mounting
screw (1” / 25.4mm, item #SL96022 - not included) through both
flash mounting trays and into the camera housing. Rotate each
flash head so they are aiming in the forward direction as shown.
Note:
A longer mounting screw is required when mounting
two flash units. Item #SL96022–for two flashes. Contact your
local SeaLife dealer to order a longer screw.