TA303 Issue 2 (HF) 03/10/18
Original Language Version
© Jack Sealey limited
layout: (refer to fig.1.)
1. Hold Button
2.
DC/AC/Ω/ / Button
3.
Range (2/4 stroke/no. cyl)
Button
4.
Max/Min Button
5.
Peak Button
6. Back light Button
7.
Rotary Selector Switch
8. 20A Terminal
9. 400mA Terminal
10.
V/Ω/Hz/%/RPM/CAP/ms/
dwell/°C/°F Terminal
11. Com Terminal
12. large lCd display
13. Test Probes
14. Thermocouple
15. Inductive Coupler
general instrument specification
Instrument complies with
IeC 1010-1 en61010-1
Insulation
Class 2, double Insulation
overvoltage category
CAT.III 1000V / CAT.IV 600V
display
4000 counts lCd display with
function indication
Polarity
Automatic, (-) negative polarity indication.
over range
"ol" marks indication
low battery indication
"BAT" is displayed when the battery
voltage drops below the operating level
Measurement rate
2 times per second, nominal
Auto power off
Analyser automatically shuts down after
approx. 30 minutes of inactivity
operating environment
0ºC to 50ºC (32ºF to 122ºF) at < 70%
relative humidity.
Storage temperature
-20ºC to 60ºC (-4ºF to 140ºF) at < 80%
relative humidity.
For inside use, max height
2000m
Pollution degree
2
Power
one 9V battery (PP3)
dimensions
170mm x 79mm x 50mm
Weight
366g
fig.1
fig.2
