background image

 2.  SPECIFICATIONS

Ideal for quick clearing up of spillages. Convenient for use in 

the home, workshop or car. Built in crevis tool for wet and dry 

pick up. Includes detail brush, squeegee brush, storage bag 

and reusable filter. Features removeable collection chamber 

for easy disposal of waste.
Voltage:.............................. 7.2V 

Charging Time: ................. 3-5hr 

Weight: .............................0.8kg 

  3.    CLEANING & MAINTENANCE

  4.    TROUBLESHOOTING

2.1.  BEFORE FIRST USE

2.1.1.  Unpack all parts and check for completeness if  

 

anything is incomplete contact your dealer.

2.1.2. 

Charging the battery

 

DO NOT 

use the vacuum whilst it is being charged.

 

 charge the battery before first use.

 

 place the vacuum on a dry and even surface.

 

 make sure the vacuum is switched off (see fig.1).

 

 insert the plug of the adaptor into the charging 

 

   socket (fig.1) plug the adaptor into a suitable  

 

   charging socket and switch on, the red charge light  

 

   will come on.

 

 the battery is charged automatically, charging time is  

 

   3-5 hours.

 

● only charge the battery when it is almost flat. This  

 

   increases the durability of the battery. 

 

● charge the battery at room temperature between 0°  

 

   and 37°C.

2.2.  VACUUMING METHODS

2.2.1. 

DRY VACUUMING 

(See fig.2).

 

 

without the foldable crevice tool for dry dirt.

 

 with the foldable crevice tool for cleaning crevices,  

 

   small corners and slots.

 

 with the foldable crevice tool and the detail brush for

 

   cleaning upholstery and cushions.

2.2.2. 

WET VACUUMING 

(See fig.3).

 

 without the rubber squeegee for damp dirt.

 

 with the rubber squeegee for small amounts of liquid.

 

Note: 

The maximum amount of liquid is indicated by  

 MAX.

2.3.  GENERAL OPERATION

 

WARNING! 

never use the vacuum cleaner without the  

 

air filter installed.

 

WARNING! 

Clean or change the air filter regularly for  

 

best performance. If after switching off, dust falls out of  

 

the appliance, it indicates that the dust container is full  

 

and needs to be emptied.

 

WARNING! 

Make sure the charging adaptor is 

 

disconnected from the charging socket.

 

WARNING! 

Make sure the On/Off switch is set to the  

 

Off position.

 

WARNING! 

Never immerse the motor part of the 

 

appliance into the water or any other liquid.

2.3.1.

Switching On/Off 

(See fig.1).

 

 

slide the On/Off switch to the on position.

 

 clean the dust, wet dirt etc. from the desired area  

 

   and switch to the Off positon. 

 

 empty the vacuum when the dust container is full, or  

 

   if the 

MAX 

mark has been reached by liquid. (Refer  

 

to Cleaning and Maintenance).

3.2.  Emptying Dust Container 

(See fig.4)

.

3.2.1.

 

Press the dust container release button (see fig.1) to 

 

release the dust container. Then remove the air filter  

 

and its holder from the dust container.

  

3.2.2.  Hold the dust container over a bin and shake out  

 

the dry dirt or pour out the water into a suitable 

 container.

3.3.  Cleaning the Air Filter 

(See fig.4).

3.3.1.  Remove the air filter from the dust container and clean 

 

it using warm soapy water. Then rinse under running  

 

water and let it dry.

3.3.2.  Rinse out the dust container with water, dry all the parts 

 

thoroughly, and reassemble.

3.4. Storage

 

Store in a dry place away from moisture, direct sunlight

 

and where it is inaccessible to children. 

 

3.1. Cleaning

 

Clean the appliance after each use. Use a damp cloth  

 

and a mild cleaning agent to clean the surfaces of the  

 

vacuum cleaner. 

DO NOT 

use aggressive or abrasive  

 

cleaning agents, petrol, solvents, chemically treated  

 

cloths or other cleaning agents, they can damage the  

 casing.

Problem 

Possible Cause 

Solution

Vacuum does not  Battery is empty. 

Charge battery.

work. 

Dust container is 

Empty dust

  full. container.

Vacuum cleaner 

Power adaptor  

Connect adaptor to 

is connected to  

is not connected 

a suitable power 

the adaptor, but 

to the power supply.  outlet.

the battery is not

charged. 

The On/Off switch  Slide it to the Off

 

is set to the On 

position.

 position.

The vacuum only  The battery is not   Charge the battery.

works for a short   fully charged.

time.

The efficiency 

The nozzle is 

Check the nozzle

decreases or  

blocked; or the 

opening; or clean/

the motor  

filter is blocked 

replace the filter.

vibrates. 

by fine dust.

Original Language Version

CPV72    Issue: 1 - 09/12/13

© Jack Sealey Limited

Отзывы: