Sealed Air Fill-Air Rocket Скачать руководство пользователя страница 12

Страница: 12 / 68

Rev. C

© Sealed Air Corporation (US) 2014

The Fill-Air

Rocket™

System packaging is intended to be used only as packaging material.

Warning!

Do not use the bags as a flotation device.

Warning!

Do not use the bags as a toy.

Warning!

Do not use the bags as a pillow.

Before performing maintenance and repair procedures, be sure of the following:

• Turn the main power switch to the OFF position, unplug the power cord, and follow proper

Lockout/Tagout procedures when instructed.

Warning!

Do not attempt to repair or modify the Fill-Air

Rocket™

system other than the

procedures contained in the

4.0 Set-up

5.0 Operation,

6.0 Maintenance and Repair

sections

of this guide. All repairs must be done by a Sealed Air

Representative or

qualified service

personnel

that have been trained by a Sealed Air

representative.

Warning!

Use protective eye wear as indicated when performing maintenance and repair

procedures.

Warning!

Do not open the covers except where instructed in the

5.0 Operation

or the

6.0 Maintenance and Repair

sections of this guide.

Lockout / Tagout (LOTO):

•

All maintenance and repair procedures should be performed in the approved manner using

Lockout/Tagout recommendations.

2.0 Safety

2.1 Important Safety Precautions (cont.)

Содержание Fill-Air Rocket





































































Результаты поиска

Содержание Fill-Air Rocket

Отзывы:

Похожие инструкции для Fill-Air Rocket

Бренды по названию

Популярные бренды

Sealed Air Fill-Air Rocket, Руководство пользователя

Результаты поиска

Содержание Fill-Air Rocket

Отзывы:

Похожие инструкции для Fill-Air Rocket

Бренды по названию

Популярные бренды