Sealed Air Fill-Air Rocket Скачать руководство пользователя страница 13

Страница: 13 / 68

Rev. C

© Sealed Air Corporation (US) 2014

Fill-Air Rocket™ Inflatable Packaging System User’s Guide

2.1 Important Safety Precautions (cont.)

2.0 Safety

Inspect at regular intervals to ensure that:

• Component cables are not cut, broken, or damaged.

• All controls and indicators function properly.

Warning!

If operation of the system differs from the descriptions in this guide, turn the

system OFF and disconnect and lock-out the main power until the unit can be inspected by a

Sealed Air

representative.

Airborne Noise Emission:

• This machine does not exceed 75 dB(A) during normal operation. Please check to make sure

you comply with your local health and safety requirements.

Environmental conditions:

• Storage temperature:

machine and material rolls 32º-110ºF / 0º-43ºC

• Operating temperature: machine and material rolls 60º-110ºF / 16º-43ºC

Note:

Material rolls, if extremely cold or hot, must be brought to operating temperature to

properly seal. Materials stored at temperatures outside the specified storage temperature range

can be damaged and rendered unusable.

Residual Risk:

Safety guarding is incorporated into the Fill-Air

Rocket™

system, however minimal access is present

at the edge seal assembly. Care and avoidance need to be taken to prevent possible contact with

or entrapment by the hot roller.

(see the following pages for

10. Safety Devices

)

Содержание Fill-Air Rocket





































































Результаты поиска

Содержание Fill-Air Rocket

Отзывы:

Похожие инструкции для Fill-Air Rocket

Бренды по названию

Популярные бренды

Sealed Air Fill-Air Rocket, Руководство пользователя

Результаты поиска

Содержание Fill-Air Rocket

Отзывы:

Похожие инструкции для Fill-Air Rocket

Бренды по названию

Популярные бренды