Sealed Air Fill-Air Rocket Скачать руководство пользователя страница 40

Страница: 40 / 68

Rev. C

© Sealed Air Corporation (US) 2014

5.4 Producing Air-Filled Bags

Warning!

Do not use bags as a flotation device, a toy, or a pillow.

Warning! Hot Roller

- When material is inflating and sealing, the edge seal roller is hot.

Be aware of the edge seal function and location.

Warning! Risk of Entrapment

- Keep fingers, loose hair, clothing and jewelry away from

the edge seal roller when material is inflating and sealing.

Press the

Start Key

to begin air-filled bag production.

• Once the system is ON and the

Start Key

is pressed, the Fill-Air

Rocket™

system will:

• Start to produce bags.

Adj

ust the air fill amount, as desired, while bags are being produced.

• Using the ( / )

Up/Down Keys

adjust the air fill amount only while bags are being produced.

Press the

Stop Key

to end inflated bag production.

5.0 Operation

Содержание Fill-Air Rocket





































































Результаты поиска

Содержание Fill-Air Rocket

Отзывы:

Похожие инструкции для Fill-Air Rocket

Бренды по названию

Популярные бренды

Sealed Air Fill-Air Rocket, Руководство пользователя

Результаты поиска

Содержание Fill-Air Rocket

Отзывы:

Похожие инструкции для Fill-Air Rocket

Бренды по названию

Популярные бренды