Seagull Models P-47D Thunderbolt 60, Инструкция по сборке

Страница: 67 / 87

67
- Glue the elevator hinges in place using the same
techniques used to hinge the ailerons.
HINGING THE ELEVATORS
INSTALL ELEVATOR CONTROL HORN
INSTALLING THE HORIZONTAL
STABILIZER
- Using a ruler and a pen, locate the centerline of
the horizontal stabilizer, at the trailing edge, and
place a mark. Use a triangle and extend this mark,
from back to front, across the top of the stabilizer.
Also extend this mark down the back of the trail-
ing edge of the stabilizer.
- Using a modeling knife, carefully remove the
covering at mounting slot of horizontal stabilizer
(both side of fuselage).
- Slide the stabilizer into place in the precut slot
in the rear of the fuselage. The stabilizer should be
pushed firmly against the front of the slot.
1.
1.
2.
1.
2.
3.