Seagull Models P-47D Thunderbolt 60, Инструкция по сборке

Страница: 37 / 87

37
- Install the mufer and mufer extension onto the
engine and make the cutout in the cowl for mufer
clearance. Connect the fuel and pressure lines to
the carburetor, mufer and fuel fller valve. Secure
the cowl to fuse lage using the M3x10mm screws.
- Install the ribs for canopy include H1, H2, H3,
H4, H5, H6, H7, H8, H9 by CA glue.
- Getting prepare aluminium square tool ( 2pcs)
and the rib of canopy.
BUILD THE CANOPY
1.
2.
- Paste prepare aluminium square tool on canopy
at the bottom by sticky tape.
3.
- Cover balsa sheet SH10 on the rib of canopy at
the both side.
4.
- Cover balsa sheet SH9 on the rib of canopy at the
both side.
5.
6.
- Building the canopy was finished.