Jumper 25
Instruction Man u al
7
9) Slide one 60mm di am e ter wheel onto
each axle and push them up against the wheel
collars. Slide the remaining wheel collars with
3mm x 6mm set screws onto the axles. Push
them up against the wheels and tight en the set
screws. The wheels should spin free and not
bind in any way. If they do bind, loos en the
set screws in the outer wheel collars and move
the collars out a small amount. Re tight en the
set screws.
NOSE GEAR INSTALLATION
PARTS REQUIRED
q
{1} Nose gear.
q
{1} Steering arm.
q
{1} Connector.
q
{1} Wheel.
TOOLS REQUIRED
Installing steering arm as follow.
Adjust the nose gear steering arm until the
arm is parallel with the fi re wall.
Slide one 60mm di am e ter wheel onto each
axle and push them up against the wheel
col lars. Slide the remaining wheel collars with
3mm x 6mm set screws onto the axles. Push
them up against the wheels and tight en the set
screws. The wheels should spin free and not
bind in any way. If they do bind, loos en the
set screws in the outer wheel collars and move
the collars out a small amount. Re tight en the
set screws.
INSTALLING THE MAIN GEAR WHEELS
