EXTRA 260.
Instruction Manual.
2
INTRODUCTION.
Thank you for choosing the
EXTRA 260
ARTF by SEAGULL MODELS. The
EXTRA 260
was
designed with the intermediate/advanced sport flyer in mind. It is a semi scale airplane which is
easy to fly and quick to assemble. The airframe is conventionally built using balsa, plywood to make
it stronger than the average ARTF , yet the design allows the aeroplane to be kept light. You will find
that most of the work has been done for you already.Flying the
EXTRA 260
is simply a joy.
This instruction manual is designed to help you build a great flying aeroplane. Please read this
manual thoroughly before starting assembly of your
EXTRA 260
. Use the parts listing below to
identify all parts.
WARNING.
Please be aware that this aeroplane is not a toy and if assembled or used incorrectly it is
capable of causing injury to people or property. WHEN YOU FLY THIS AEROPLANE YOU
ASSUME ALL RISK & RESPONSIBILITY.
If you are inexperienced with basic R/C flight we strongly recommend you contact your R/C
supplier and join your local R/C Model Flying Club. R/C Model Flying Clubs offer a variety of training
procedures designed to help the new pilot on his way to successful R/C flight. They will also be able
to advise on any insurance and safety regulations that may apply.
ADDITIONAL ITEMS REQUIRED.
!
.91-1.25 2-4 stroke engine.
!
Computer radio with six digital
servos.
!
Glow plug to suit engine.
!
Propeller to suit engine.
!
Protective foam rubber for radio
system.
!
Silicone fuel line.
PARTS LISTING.
FUSELAGE ASSEMBLY
!
(1) Fuselage.
!
(1) Canopy hatch.
WING ASSEMBLY
!
(1) Right wing half/ aileron.
!
(1) Left wing half/ aileron.
!
(1) Aluminium dihedral brace.
Horizon Hobby, Inc. guarantees this kit to be free from defects in both material and workmanship
at the date of purchase. This warranty does not cover any parts damage by use or modification. In
no case shall Horizon Hobby’s liability exceed the original cost of the purchased kit. Further, Horizon
Hobby reserves the right to change or modify this warranty without notice. In that Horizon Hobby
has no control over the final assembly or material used for the final assembly, no liability shall be
assumed nor accepted for any damage resulting from the use by the user of the final user-assembled
product. By the act of using the user-assembled product, the user accepts all resulting liability.
Once assembly of the model has been started, you must contact Horizon Hobby, Inc. directly
regarding any warranty question that you have. Please do not contact your local hobby shop regarding
warranty issues, even if that is where you purchased it. This will enable Horizon to better answer
your questions and service you in the event that you may need any assistance. If the buyer is not
prepared to accept the liability associated with the use of this product, the buyer is advised to
return this kit immediately in new and unused condition to the place of purchase.
Horizon Hobby
4105 Fieldstone Road
Champaign, Illinois 61822
(217) 355-9511
