Seagate ST3160026A-RK, Руководство пользователя

Страница: 6 / 134

Hardware setup
For a dual-interface kit:
1. Plug the AC-power adaptor into the hard drive and
the wall outlet.
2. Refer to the table opposite to select the fastest
interface that is supported by your computer,
and use that cable to connect the drive to your
computer. USB and IEEE 1394a (FireWire)
connectors have unique shapes, and each
connector is shaped to allow only one way
to connect.
Caution. Use only one interface at a time. If you connect both
the USB and the IEEE 1394a (FireWire) cables to the same
external drive at the same time, you could damage the drive.
However, it is OK to connect two IEEE 1394a (FireWire) cables
to the same drive at the same time to daisy-chain devices.
External Hard Drive
5
ENGLISH
USB IEEE 1394a
(FireWire)
Interface Transfer rate
USB 1.1 12 Mbits/sec
USB 2.0 480 Mbits/sec
IEEE 1394a (FireWire) 400 Mbits/sec
If you are a Macintosh user and you intend to use the
pushbutton-backup feature, you must use the FireWire
interface.
BounceBack Express does not support the
pushbutton-backup feature for Mac OS that is using
a USB interface.
Continue to step 3 on page 6.
For a USB-only kit:
1. Plug the AC power adaptor into the hard drive
and the wall outlet.
2. Use the USB cable to connect the drive to
your computer.
Continue to step 3 on page 6.
Print Date:2005-May-10 12:38:44 MDT Released; Prod Rel; A; D0000115888 Seagate Confidential