Seagate Scorpion 96, Руководство по установке

Страница: 34 / 44

DAT Autoloader Installation Manual 27
display shows the word “OPERATOR.” These and other
messages are summarized in the following table:
➤
Note. In the following table, the letter n indicates which
drive slot is affected. If no slot number is shown, a single
cartridge has been inserted.
8-digit display messages
Message Description
0 TAPE This message alternates with the CHK MAG message to
indicate that the magazine contains no cartridges.
N TAPE After the drawer is closed, this message displays for 2
seconds. The variable N indicates the number of cartridges
in the magazine.
CHK MAG The cartridge is not correctly inserted in the magazine, or
the magazine contains no cartridges.
CLEAN n A cleaning cycle is occurring on the cartridge in slot n
CLOSING The drawer is closing.
END MAG In sequential mode operation, the magazine is at its end.
EJECT n The cartridge from slot n is being ejected from the drive.
EJECTING The magazine is being ejected to the dismount position.
ERASE n The cartridge from slot n is being erased.
ERROR x A loader mechanism error occurred. See the following
table for an explanation of the errors.
LOAD n The cartridge from slot n is being loaded and initialized.
OPENING The drawer is opening.
OPERATOR Operation action is required because a magazine is not in
place.
READ n The cartridge from slot n is being read.
READY n The cartridge from slot n is in the drive and the drive is
ready.
REWIND n The cartridge from slot n is rewinding.
SCANNING The magazine is being initialized.