Seagate Scorpion 96, Руководство по установке

Страница: 19 / 44

12 DAT Autoloader Installation Manual
Dip switches on top of autoloader drawer (bank of
seven):
A bank of seven dip switches located on top of the autoloader
drawer (see Figure 5). These switches are used to set the
language used in the alphanumeric LED display and to adjust
the brightness of the display.
➤
Note. This bank of switches can only be configured while
the drive is outside of a system enclosure. In addition,
you must power-on the drive to open the magazine
drawer.
The table below summarizes the functions of the seven dip
switches on top of the autoloader drawer.
Switch Description Default
1 LED display language switch
(see table below) OFF
2 LED display language switch
(see table below) OFF
3
reserved
OFF
4 LED display intensity
(ON=bright; OFF=dim) OFF
5 reserved OFF
6 reserved OFF
7
reserved
OFF
Switches 1 and 2 can be used to select the language used in
the alphanumeric LED display on the front of the drive. The
default language is English. If you need to select a different
display language, you must set Switches 1 and 2 as shown in
the following table.
Language Switch 1 Switch 2
English
Off Off
German
Off On
French
On Off
Spanish
On On