Seagate Scorpion 96, Руководство по установке

Страница: 14 / 44

DAT Autoloader Installation Manual 7
Changing the default settings
To change one or more of the default settings (including SCSI ID
or SCSI termination), you will need to use one of the following:
External dip-switches located on a cutout on the top of
the drive:
•
SCSI ID
•
MRS checking
•
Parity checking
•
Data compression
•
Power-on self-test enable
Jumpers on the back of the drive:
•
SCSI termination
•
Terminator power
•
Remote SCSI address selection
Internal dip switches located on the autoloader drawer:
•
Autoload first tape
•
Display orientation
•
Display language
•
Display intensity
➤
Note. Whenever possible, power down the drive before
changing jumpers or dip switches. Your changes will take
effect when the drive is subsequently powered on.