Seagate Medalist 2160N (ST52160N), Руководство по эксплуатации продукта

Страница: 117 / 138

C.5 Verify error recovery page (07
H
)
The verify error recovery page specifies the error-recovery parameters
the target uses during the Verify command and the verify operation of
the Write and Very commands.
Bytes
Bits
7 6 5 4 3 2 1 0
0 PS (1)
RSVD
(0)
Page code (07
H
)
1 Parameter length (0A
H
)
2 Reserved EER PER DTE DCR
default 0 0 0 0 1 0 0 0
changeable 0 0 0 0 1 1 1 1
3 (default) Verify retry count (20
H
)
changeable FF
H
4 (default) Verify correction span (40
H
)
changeable 00
H
5 (default) Reserved (00
H
)
changeable 00
H
6 (default) Reserved (00
H
)
changeable 00
H
7 (default) Reserved (00
H
)
changeable 00
H
8 (default) Reserved (00
H
)
changeable 00
H
9 (default) Reserved (00
H
)
changeable 00
H
10–11
(default)
Verify Recovery time limit (FFFF
H
)
changeable 00
H
Byte 2 When the enable early recovery (EER) bit is 1, the drive
applies on-the-fly T>1 ECC correction as soon as possible,
before it attempts other retry mechanisms, and without
reporting successful corrections to the host as a recovered
error. Seek error retries and message system errors are not
affected by this bit. When this bit is set, the DCR bit must
be 0. When the EER bit is 0, the drive applies ECC correc-
Medalist Pro 2160N/2160WC Product Manual, Rev. A 107