Seagate Medalist 1640, Руководство по эксплуатации продукта

Страница: 30 / 48

2.3.4 Cable-select option
Computers that use the cable-select method for determining the master
and slave drive do so by selecting or deselecting pin 28, CSEL, on the
interface bus. Figure 5 shows a typical cable-select configuration. The
master and slave drives are determined by their physical position on the
bus:
•
The drive plugged into the I/O connector that carries the CSEL signal
is the master.
•
The drive plugged into the I/O connector that does not carry the CSEL
signal is the slave.
To configure the drives for computers that use cable select:
•
Install shunts on pins 9 and 10 as shown in Figure 4 on page 20.
Connect the drives to the bus as shown in the example in Figure 5.
Figure 5. Connecting cable-selected drives
22 Medalist 1640 and 2140 Product Manual, January 1996