Seagate Hawk 2 ST11900N, Руководство по эксплуатации продукта

Страница: 59 / 82

Product Manual - Hawk 2 Family SCSI-2 (Volume 1), Rev. C 51
_________________________________________________________________________________________
11.6.1 DC cable and connector
The "N" and "ND" model drives receive DC power through a 4 pin connector mounted at the rear of the main PCB
(see Figure 11.6-1). Recommended part numbers of the mating connector are listed below, but equivalent parts
may be used (see Table 11.6-1).
Table 11.6.1-1. Mating connector parts
Type of cable Connector Contacts (20-14 AWG)
14 AWG AMP 1-480424-0 AMP 60619-4 (Loose Piece)
AMP 61117-4 (Strip)
For "NC" models, the DC power is routed through the SCSI 80 pin I/O connector. Current carrying capacity is for
one drive only, plugged directly into the host 80 pin I/O connector (no cable).
11.6.2 Physical characteristics
This section defines the connectors, cables, signals, terminators and bus timing needed to implement SCSI.