Seagate Hawk 2 ST11900N, Руководство по эксплуатации продукта

Страница: 13 / 82

Product Manual - Hawk 2 Family SCSI-2 (Volume 1), Rev. B 5
________________________________________________________________________________________
4.0 Standard features
The Hawk 2 Family has the following standard features:
•
Integrated SCSI Controller
•
Single Ended and Differential SCSI drivers and receivers
•
Asynchronous and Synchronous data transfer protocol
•
Firmware downloadable via SCSI interface
•
Selectable sector size from 256 to 4096 bytes/sector
•
Programmable sector reallocation scheme
•
Flawed sector reallocation at format time
•
Programmable auto write and read reallocation
•
Reallocation of defects on command (Post Format)
•
96 bit Reed-Solomon error correcting code
•
Sealed Head/Disc Assembly
•
No preventative maintenance or adjustment required
•
Dedicated head landing zone
•
Automatic shipping lock
•
Automatic Thermal Compensation
•
Patented Tri-Phase Servo with embedded Grey Code track address to guarantee servo positioning.
•
Self diagnostics performed at power on
•
1:1 Interleave
•
Zoned Bit Recording (ZBR)
•
Vertical, horizontal, or top down mounting
•
Dynamic spindle brake
•
Synchronous spindle capability
•
256 K byte data buffer (Optional 1 MB available)
•
Permanently mounted terminators (for model ST12400N only), enabled by installation of a jumper plug.
4.1 Performance
•
Programmable multi-segmentable cache buffer
•
5411 RPM Spindle. Average latency = 5.54 ms
•
Command Queuing of up to 64 commands per initiator
•
Background processing of queue
•
Supports start and stop commands
•
Provides synchronized spindle capability
•
Low audible noise for office environment
•
Low power consumption
4.1.1 Reliability
•
500,000 hour MTBF
•
Adaptive seek velocity. Improved seek performance
•
LSI circuitry
•
Balanced low mass rotary voice coil actuator
•
5 year warranty