5-6
Maxtor DiamondMax 17 80-160GB Serial ATA Hard Disk Drive
SATA Bus Interface and ATA Commands
47 15-8:
80h
7-0:
00h = Reserved
01h-FFh: = Maximum number of sectors that shall be transferred per interrupt on READ/
WRITE MULTIPLE commands
48 Reserved
49
Capabilities
15-14:
Reserved for the IDENTIFY PACKET DEVICE command.
13:
1 = Standby timer values as specified in this standard are supported.
0 = Standby timer values shall be managed by the device
12:
Reserved for the IDENTIFY PACKET DEVICE command.
11:
1 = IORDY supported. 0 = IORDY may be supported
10:
1 = IORDY may be disabled
9:
1 = LBA supported
8:
1 = DMA supported.
7-0:
Retired
50 Capabilities
15:
Shall be cleared to zero.
14:
Shall be set to one.
13-2:
Reserved.
1:
Obsolete
0:
Shall be set to one to indicate a device specific Standby timer value minimum.
51-52
Obsolete
Word
Content Description
Содержание DiamondMax 17
