Seagate DiamondMax 17, Руководство пользователя

Страница: 3 / 60

Before You Begin
Thank you for your interest in Maxtor DiamondMax 17 80-160GB Serial ATA hard disk drives. This manual provides tech-
nical information for OEM engineers and systems integrators regarding the installation and use of Maxtor Serial ATA
hard drives. Please do not remove or cover up Maxtor factory-installed drive labels. They contain information required
should the drive ever need repair. Drive repair should be performed only at an authorized repair center. For repair infor-
mation, contact the Maxtor Product Support Center at 1-800-2MAXTOR.
CAUTION: Maxtor hard drives are precision products. Failure to follow these precautions and guidelines outlined here
may lead to product failure, damage and invalidation of all warranties.
1 Before unpacking or handling a drive, take all proper electrostatic discharge (ESD) precautions, including
personnel and equipment grounding. Stand-alone drives are sensitive to ESD damage.
2 Before removing drives from their packing material, allow them to reach room temperature.
3 During handling, never drop, jar, or bump a drive.
4 Once a drive is removed from the Maxtor shipping container, immediately secure the drive through its
mounting holes within a chassis. Otherwise, store the drive on a padded, grounded, antistatic surface.
Never stack hard drives. This may cause damage to the drive.
Corporate Headquarters
Maxtor Corporation
500 McCarthy Blvd.
Milpitas, California 95035
Tel: 408-894-5000
Fax: 408-362-4740