Seagate 15K.2 - Savvio 146.8 GB Hard Drive Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 78

background image

Savvio 15K.2 SAS Product Manual, Rev. C

13

5.0

Reliability specifications

The following reliability specifications assume correct host and drive operational interface, including all inter-
face timings, power supply voltages, environmental requirements and drive mounting constraints.

5.1

Error rates

The error rates stated in this manual assume the following:
• The drive is operated in accordance with this manual using DC power as defined in paragraph 6.2, "DC

power requirements."

• Errors caused by host system failures are excluded from error rate computations.
• Assume random data.
• Default OEM error recovery settings are applied. This includes AWRE, ARRE, full read retries, full write

retries and full retry time.

5.1.1

Recoverable Errors

Recoverable errors are those detected and corrected by the drive, and do not require user intervention.

Recoverable Data errors will use correction, although ECC on-the-fly is not considered for purposes of recov-
ered error specifications.

Recovered Data error rate is determined using read bits transferred for recoverable errors occurring during a
read, and using write bits transferred for recoverable errors occurring during a write.

5.1.2

Unrecoverable Errors

An unrecoverable data error is defined as a failure of the drive to recover data from the media. These errors
occur due to head/media or write problems. Unrecoverable data errors are only detected during read opera-
tions, but not caused by the read. If an unrecoverable data error is detected, a MEDIUM ERROR (03h) in the
Sense Key will be reported. Multiple unrecoverable data errors resulting from the same cause are treated as 1
error.

Seek error rate:

Less than 10 errors in 10

8

seeks

Read Error Rates

1

1. Error rate specified with automatic retries and data correction with ECC enabled and all flaws reallocated.

Recovered Data

Less than 1 error in 10

12

bits transferred (OEM default settings)

Unrecovered Data

Less than 1 sector in 10

16

bits transferred

Miscorrected Data

Less than 1 sector in 10

21

bits transferred

Interface error rate:

Less than 1 error in 10

12

bits transferred

Mean Time Between Failure (MTBF): 1,600,000 hours
Annualized Failure Rate (AFR)

0.55%

Preventive maintenance:

None required

«
...
19
20
21
22
23
...
»

Содержание 15K.2 - Savvio 146.8 GB Hard Drive















































































Отзывы:

Нет отзывов

Похожие инструкции для 15K.2 - Savvio 146.8 GB Hard Drive

DRUMBEAT 2000 ECOMMERCE EDITION

Бренд: MACROMEDIA Страницы: 238

Бренд: Amazon Страницы: 60

Бренд: Billion Страницы: 42

Telephony Modem Simulator

Бренд: Intrinsyc Страницы: 2

Бренд: Avision Страницы: 47

Бренд: Livescribe Страницы: 88

Бренд: Bay Networks Страницы: 90

Бренд: GAI-Tronics Страницы: 5

DREAMWEAVER MX 2004-EXTENDING DREAMWEAVER

Бренд: MACROMEDIA Страницы: 296

IDENTITY MANAGER 3.6.1

Бренд: Novell Страницы: 54

DS-601 - VPN Client - PC

Бренд: D-Link Страницы: 2

CARDACCESS 3000 - ARCHITECTURAL AND ENGINEERING SPECIFICATION...

Бренд: NAPCO Страницы: 6

COLFUSION MX 7-CFML

Бренд: MACROMEDIA Страницы: 38

RAPTOR DL-LITE - X11R6.1 FOR AIX INSTALLATION-REFERENCE

Бренд: Tech Source Страницы: 32

Бренд: Lenovo Страницы: 98

Бренд: Lenovo Страницы: 134

Бренд: Canon Страницы: 168

Бренд: Allied Telesis Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды