SD-MA-025
31
unchecked
：
When the number of the selected input ports of some output is not the same,
immediately start next loop when one output finished a loop.
checked
：
All outputs start a new loop together. When the number of the selected input
ports of some output
is not the same, will not start next loop until other outputs finish theirs
current switching loop.
Send cmd only one loop
：
stop
automatically switch when a loop is finished.
Select all outputs
：
Tick all output ports
6.
Click ‘Start’ button to start
looping.
7.
Click ‘Stop’ button to stop
looping.
4.7
Signal Setting
1.
Read and set the type of all input ports (DVI/VGA/YPbPr/CVBS), corresponding to the actual input
terminal type: HDMI (DVI) /VGA/YPbPr/CVBS;
Note: Only the DVI-U input board has this setting, SDI/HDBaseT/ fibre and other input boards,
this setting is invalid.
