Attaching the Optional Accessories
Leak sensor
E-18
LCD Monitor Hood with Lens
The optional leak sensor (46115) can be attached on this product.
The LCD monitor hood holder on this product accepts the LCD monitor
hood with lens (52121).
CAUTION
Before attaching the optional leak sensor (46115) on this product, be sure to
read the instruction manual for the leak sensor.
CAUTION
When attaching LCD monitor hood to the LCD monitor hood holder,
always make sure to refer to and follow the instructions in the
accompanying instruction manual.
2
Cut each cord clip by 5 mm as
shown in the figure below, attach
the two clips and pass the
sensor cord through them
Peel off the mount from the
backside of the leak sensor and
attach the sensor to the position
indicated in the figure
①
Insert the LED in the position
indicated in the figure; then,
bundle the excess cord and fit in
the groove
②
1
<Attaching procedure>
①
②
Cord clip
5mm
Attaching the Optional Accessories
Accessory shoe
E-17
Stays / Arms
<Example>
Strobes / lights can be mounted to the accessory shoe by using optional
Mini Shoe Arm (29511) or Hot Shoe Arm (29501) or SA8 Ball Base for
Accessory Shoe (22120).
SEA&SEA stays/ arms can be mounted to the housing’s tripod socket.
CAUTION
The max. weight of an accessory that can be mounted to the accessory shoe
is approx. 1050g / 36.75oz
.
Remove the accessories from the accessory shoe when carrying the housing
out of water.
When attaching the accessories to the accessory shoe, always refer to
the instruction manual provided.
<Example>
SA8
